Teraflex Alpine Short Control Arm Kit for 2018-2026 Wrangler JL
TeraFlex JL: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 0-4.5" lifts. Bolts to the factory control arm mounting brackets. Can be added to any existing suspension lift. High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
Fits:
- JL Wrangler (2-door)
- JL Wrangler Unlimited (4-door)
- 0-4.5" Lift
Includes: Alpine Short Control Arm Kits:
- Front Upper (# 1416520)
- Front Lower (# 1416500)
- Rear Upper (# 1416560)
- Rear Lower (# 1416540)
Features & Benefits: JL Alpine Short Control Arms:
- Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5" lift kits
- Alpine Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
- Bolts to the factory control arm mounting brackets JL Alpine Control Arms (all):
- Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
- Full range of movement will not restrict articulation or flex off-road
- High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality
- Zero maintenance forged threaded joints for smooth quiet flex
- Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
- Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
- Install and drive simple bolt-on installation - no welding required
- TeraFlex Lifetime Warranty against defects
Short Control Arm Specs: JL / JT: Alpine Short Control Arm Kit - Front Upper (# 1416520):
- Tube Diameter & Wall = 42mm x 4mm
- Factory Length = 20.185"
- Min. Length = 20"
- Max. Length = 21"
- Both Ends = 14mm Bolt
JL / JT: Alpine Short Control Arm Kit - Front Lower (# 1416500):
- Tube Diameter & Wall = 42mm x 4mm
- Factory Length: 24"
- Min. Length: 24"
- Max. Length: 25.25"
- Both Ends: 16mm Bolt
JL: Alpine Short Control Arm Kit - Rear Upper (# 1416560):
- Tube Diameter & Wall = 42mm x 4mm
- Factory Length = 17.425"
- Min. Length = 17-3/8"
- Max. Length = 18-1/2"
- Both Ends = 14mm Bolt
JL: Alpine Short Control Arm Kit - Rear Lower (# 1416540)
- Tube Diameter & Wall = 42mm x 4mm
- Factory Length = 19-3/4"
- Min. Length = 19-13/16"
- Max. Length = 21-1/16"
- Both Ends = 14mm Bolt
- Both Bushings = # 611011
Note(s):
- Alignment required.
Item# 1416610
