Mopar Deluxe Molded Splash Guards for 2011-2020 Grand Cherokee WK2
Availability: In Stock
*Does not include orders shipped to AK, HI, & PR
*Not valid on skid plates, rock rails, bumpers, body kits, some cargo liners, soft tops and certain oversize items.
|2011-2020||Grand Cherokee WK2|
81% Recommend this product (26 of 32 responses)
March 29, 2019
I love this item on my 2012 and 2019 Grand Cherokee.
Harder to install than I expected
January 17, 2019
The instructions were not well written and illustrations were not clear to detail. I like the looks of the splash guards and they fit very well, in spite of taking more time than I expected. The instructions show removing the rear wheels, which you don't need to do if you have a small drill to do the work with. I would buy them again.
ProsNice looking on my Grand Cherokee Limited.
Gives my jeep a better look
June 18, 2018
this product is well worth the purchase. I installed it myself, and it took me only about an hour to do the front and back. It says to take the back tires off, but i never had to do that. I did however have to drill two holes for the front ones but that was pretty easy as well.
December 11, 2017
They fit and look great. Pretty easy to install if you are handy.
ProsThey fit perfect to the vehicle fenders.
ConsThe rear tires need to be removed for installation.
October 30, 2017
The rear splash guards do not fit nicely, they weren't molded to fit tight up against the wheel well. There's a gap on the inside of the wheel well where the splash guard drops down a couple inches and doesn't meet up to it. So not impressed with the look!
By Capt R.
Looks like factory!!
September 24, 2017
Install was a bit tedious, especially the backs having to take off the rear tires but it was worth the couple hour effort. They highly compliment the looks and will provide fine protection.I didn't use the plastic rivet per flap that require a special tool, went to Fleet Farm in Hudson, WI and got two black plastic rivets that had an external screw that locked it in place. Worked just fine.They're in the automotive trim component hardware section. I also siliconed around the upper outside where they lay against the firewall to prevent crud from drooling down behind. (Marine Clear Silicone in a tube)
ProsThe factory couldn't have made them look any better.
ConsInstallation may beyond some peoples capability.
Absolutely love my jeep grand cherokee
September 6, 2017
Rides smooth, looks great, good gas miles, just love it!
Items are good quality.
July 31, 2017
Items fit well. Not made in the USA thou. A little disappointed about that. I did have to go to the auto store to purchase different plastic fasteners. I used the ones sent on the left rear one. But after buying different fasteners. The others went on very fast. I still had to remove the rear tires. But no big deal. In all it took about an hour to install them. And most of that time was on the rear left. I learned faster ways for the rest.
ProsFit very well. Color matched rest of plastic on car.
ConsDifferent fasteners would be a big help. And made in the USA would be better!
March 18, 2017
Easy install, follow directions. Arrived on time as promised.
Work well, but not easy installation and no extra parts
March 15, 2017
I had previously bought some flaps for my Yukon and they went on in less than 20 minutes. These Jeep flaps took me over an hour to get installed, so if you are thinking a simple garage job, be prepared to remove at least the rear tires to be able to drill the holes necessary for the installation. Also, they require a pop-rivet tool and what they send is plastic rivets, so if you mess one up using a tool designed for metal rivets, you are stuck without the right number of parts. Overall, they look good, but not an easy process to get them installed at all.
ProsLook good and fit as they should
ConsHard to install No extra parts Require tools most people do not have
March 3, 2017
Fit the contour of the wheel well perfectly. Installation is easy, but time consuming, since the instructions were not exactly written around the model year of my GC.
ProsPerfect fit, solidly attached, decent quality.
ConsInstructions need to be updated for later model vehicles.
By Jackie F.
December 23, 2016
Had these mud flaps installed at the dealer and they worked perfect!
ProsJeep trademark and perfect fit
November 18, 2016
Easy to install and easier to order on Just for Jeeps!
July 31, 2016
Had to make a few adjustments on installation but nothing major. Look very good on truck.
July 31, 2016
EZ perfect fit & install
ProsExact fit, great instructions.
Nice product install was easy
May 16, 2016
Really happy with this purchase company made my ordering mistake correction. Product came in on time. The product is made of quality material and was easy to install. This item completes the look I was wanting for my JEEP. Thanks
April 2, 2016
Fast delivery im very happy with my purchase . Recomended to anybody
ProsEasy instalation, just follow the ins step by step. Great excuse to do it with a beer in hand :)
February 27, 2016
I purchased a set of these for the front and rear of my 2015 Jeep Grand Cherokee Outlander. They look great and are excellent quality.
BWI airport area
mudgaurds for grand cherokee
January 11, 2016
good investment for protecting paint.
Prosinstalled easily with existing screwholes. have to wait until tire rotation to install bottom screws on rear flaps. Price is well worth fit and function.
Conshaving to remove tires is a pain.
Great fit. Easy to install
December 16, 2015
These items fit great. You will need a rivet gun for plastic rivets. I didn't have one, I installed mine without the plastic rivet and they fit well until I was able to borrow one to install the rivet.
ConsNeed for plastic rivet gun
By David D.
August 29, 2015
They do not fit the 2015 Jeep Cherokee Trail Hawk very well. Had to be modified
ProsProbably fit the Grand Cherokee nicely.
ConsDoes not fit well on the Trail Hawk.
By Gary H.
2015 splash guards
August 8, 2015
don't buy these if you are not mechanically inclined. fronts took all day to install. hardware that came with the guard was inadequate, had to take a trip to the hardware store. rears went on fairly easy. the rivet that comes with the guard did not fit any of the rivet guns i have. basically a PITA!!!
Prosthey look nice if you take your time to install them correctly
Consthere has to be an easier install, do the people that make these ever install them on an actual vehicle?????
New instructions needed
July 2, 2015
The instructions are horrible. The rivets they show you prying out on the rear guards are actually hex head screws that need to be reused. Also no one has a rivet gun for plastic rivets in their garage. I thought I could use a gun for aluminum rivets but I couldn't. I had to make a second order for the rivet gun and pay more for shipping than the gun was worth. I don' know why they show you cutting an X for the top hole in the rear guards when a one quarter inch hole is required for the bolt.
Oxford, New York
Quick installation with some minor problems
June 25, 2015
Installation was quick. Pictorial directions were not very helpful. Written directions in addition would have been a plus.
ProsFit as advertised
ConsThe installation hardware came with plastic rivets that needs a special tool to utilize. I was forced to use other hardware from a local store
April 29, 2015
Drivers side back splash guard wasn't centered and looked a bit off factory wise
Grand Cherokee Splash Guards
April 1, 2015
I purchased both the front and rear splash guards for my 2015 Grand Cherokee. There isn't a part number shown for this review, but the picture seems to show the fronts, so I'll comment about them. The install went fairly smoothly, despite the vague instructions. I'm VERY "old school", and prefer a few words of instruction, as well as an actual picture or two, as opposed to the current fad of CAD drawn "pictograms", and an assumption that you understand what the drawing is trying to tell you. At least these parts are fairly simple, and their concept is easy to understand. The only real issue I had, was understanding the new style plastic rivets that are used to secure the inner fender liners. They have to be cut off, not pried out or unscrewed. The screws included with the splash guards do replace them, however, so there's no real issue in that respect.
ProsGood fit, follow the body contours well, hang low enough to deflect most of the crud that will be kicked up by the tires.
ConsBecause they hang low enough to deflect most of the crud that the tires kick up, they MIGHT be a little too low in an off-road situation.
Grand Junction, CO
Installation too complicated
February 4, 2015
Really, I have to buy a rivet gun to install them? Get a grip, Mr, Designer.
Great Service - Great Product
January 1, 2015
First purchase and entire transaction was perfect, will buy again.
ProsGreat product, install was easy. Snowed a couple of days after install, definitely keeps the road grime off your vehicle.
look very nice
October 23, 2014
These look very nice after install and are fitted to the vehicle well.Front was fairly easy to install even with the instructions being terrible. Rear was a little more difficult to install and these directions completely left out a step regarding one of the clips. On my 2014 the the directions stated to remove and throw away a screw that held on the body side molding. This hex head screw was larger and in my opinion better that the smaller phillips head screw they provided. I reused the hex head screw. Also on the rear the instructions tell you not to remove the factory plastic rivet holding the body side molding. On my 2014 with dual exhaust I had to remove this rivet to install one of the clips.Instructions front and rear state to drill a 3/32" hole in the vehicle to install a rivet. IMHO this is not needed and I did not install it.
ProsLook very nice. Looks alone would be 5 stars. Directions no stars.
ConsWorst instruction known to man.
Little Rock, AR
Looks really good
December 31, 2013
Easy to install and despite being in a not-so-noticeable area of the Jeep, it adds a lot of style. Looks great.
ProsEasy to install and looks goods