Free Standard Shipping
on orders over $99.* see details
*Free shipping automatically applied at checkout. Orders will be shipped via standard shipping (3 to 15 business days). Does not include orders shipped to AK, HI, PR or outside the USA. Only valid on items that have this message on their item page:
Mopar Pedal Kit for 2011-2021 Grand Cherokee WK2
click to enlarge

Mopar Pedal Kit for 2011-2021 Grand Cherokee WK2

Item: 82212055
Manufacturer: Mopar
Availability: In Stock

*Does not include orders shipped to AK, HI, & PR

*Not valid on skid plates, rock rails, bumpers, body kits, some cargo liners, soft tops and certain oversize items.

Regular price: $145.00Sale price: $130.50You Save: $14.50!(10%)

Compatibility Guide

2011-2021Grand Cherokee WK2

moparPedal Kit for 2011-2021 Grand Cherokee WK2

Update your factory-installed pedals with this set of pedal covers can help give your Jeep added distinction and set it apart from other vehicles' interiors. The Mopar Pedal Kit 82212055 for the 2011-2021 Jeep WK2 Grand Cherokee supplies bright pedal covers that are easy to install and are custom-designed specifically for the pedals of your vehicle. Available at, the Pedal Kit is made of 304 polished stainless steel and comes with black rubber pads. They're compatible with Jeep Grand Cherokees made from 2011 on.

Mopar Item # 82212055


38 Reviews
58% (22)
32% (12)
5% (2)
3% (1)
3% (1)
92% Recommend this product (35 of 38 responses)
By Eric S.
SRT Pedals
July 20, 2021
They look great and worth the money. Every review regarding the challenge getting the brake pedal on is true. I boiled it and made a quarter of an inch cut(maybe less) on the bottom corners to help get it to slip over the metal lip....... hope it helps!
Prosstylish, sets the interior apart..
Consbrake pedal takes some effort to install.
By Lonnie G.
Reserve, Louisiana
May 3, 2021
Very nice looking, change the interior looks. Very good quality.
ProsLooks great.
ConsBreak pedal hard to install, recommend soaking in hot water, use gloves & lube to install.
By Hosam
New Castle
OEM Quality and Fast Shipping
March 22, 2021
OEM Quality and fast shipping.

I liked the new pedals as they add a nice touch at the interior.
By Eric
Newtown, CT
Way better then stock! (unless yours came with these)
August 31, 2020
Great upgrade for the Limited, wish these came stock on them because they are quite a pain to install, but once they are on they are a great upgrade
ProsGreat Finish Grip
ConsInstallation process is not fun
By mark b.
not bad, 2nd time around
August 17, 2020
I've had these pedals on 2 grand cherokee's now and the installation is no breeze. my hands cramped up 3, 4 times, and I got strong hands lol

once they're on, they're great! better feel, better looks and swear it stops my jeep 8' shorter every time! lmao
Prossee above
Conssee above
By Phil
November 30, 2019
Looks great! Does take some time and patience to get brake pedal cover on (used a paint can opener to hook around rubber and slowly pull into place until completely secured around the brake pedal. Have to do by 'feeling' as you go because you cannot 'see' what you are doing.
ConsAmazon sells the identical Mopar pedal kit for $30.00 less!!!
By Drew
Looks good, pain to install
October 8, 2019
Looks good, exactly what i wanted. Brake cover is a PITA, but eventually got it on. Used all the tips in other reviews along with a strong plastic bicycle tire lever.
ProsLooks good, gas pedal install took seconds
ConsA little pricey for what it really is, brake cover install
By Peter
Westford MA
Really nice addition
August 22, 2019
Purchased along with the tubular side steps. Since I am in the area, had the dealer install it all. Very nice look. Fits well. Read all the reviews re: difficulty of install of the brake pedal and was glad to spend the labor cost and have the dealer install both my items. They were very professional. Quick and easy.
By Paul
Great addition
August 15, 2019
The pedals really add the finishing touch to the interior of the new Jeep! Quick delivery and good price. A little tough to install but, stick with it
ProsA great look
By L
Pedal Kit
November 8, 2018
Easy to install the gas pedal, brake pedal is a bit harder to install but well worth the effort.Finished look is a good upgrade. Quality of pedal kit is good.
By John
North Carolina
nice looking
July 25, 2018
These covers add a nice touch. like everyone else has expressed, the brake pedal cover is a bear to put on. I had to modify it a little but to get it to fit on.
Consbrake pedal is to stiff. No need for such stiff rubber. make it more pliable.
By Mile
A Nice Addition
June 20, 2018
Definitely a must have item. Recommend to place the brake pedal in boiling water to soften the rubber. Makes installation much easier.
ConsBrake pedal - must soften the rubber
By Art
Poor Fit
June 7, 2018
The gas pedal fit like a glove, but the brake pedal never would go on !!!
ConsBad design for the brake pedal
By jay
looks great
April 18, 2018
looks great. pretty hard to get brake on.
Ann Arbor, MI
Good quality, it looks great
March 30, 2018
Great quality, I fits perfect, like everyone here brake pad is hard to install, boil it for 15min it's a must
By Gerry
Severn, Maryland
Good Quality, great looking
July 15, 2017
Looks great and makes pedals more noticeable. Takes some work to get the brake pedal on, but coating the inside edges with dish washing liquid and using a small screw driver, it is doable.
ProsLooks great
ConsInstallation is somewhat challenging.
By Kyle
Nice Touch
May 1, 2017
Great addition. As others have said, install was tough; had to boil the brake cover and file down the tabs on the gas pedal but still only took 10-15 minutes. Very rewarding when you get it!
By Al
Middletown, NJ
What a pain to get on!!
January 12, 2017
Looks great but what a pain in the buff to get on!!
Proslooks gret!!
ConsPain to apply!!!
By Kris
Bethlehem, Pa
Should have listened to the other reviews.
August 27, 2016
One of the worst purchases I've made in my lifetime. The quality is there, the fitment or lack there of is an absolute joke. The gas pedal wouldn't even snap on and the brake pedal? Forget about. Complete waste of money. It's too bad because it would definitely enhance the looks of the interior. Read other reviews elsewhere as well. Why I took the chance I have no idea.
By Kristine
Arlington VA
August 5, 2016
Love them! The look so much better than plain black. Hard to get on though! Had to have my BF do it.
By FoxJeep
Great look
June 12, 2016
Classy look for my Jeep cherokee
ProsEasy to install gas
ConsLike everyone else said, it's hard to install the brake. I had to use a hair dryer to get the rubber nice and hot so I could stretch it and use the screw driver to help get the edges.
By Jason
Oak Creek WI
Simple mod for the interior...
May 28, 2016
Decided to add these even though the reviews said the brake pedal was a PITA. Actually for me it went very smoothly. I didn't even use hot water. I just used a small flat head screwdriver to get it fit. A little frustrating at first but once I got it started I just kept just going around the pedal. The accelerator was easy-just snap on and done.
Prossimple mod to improve interior looks sporty feel and look
By Jeep_addicted
St. Thomas, USVI
Aesthetically Pleasing and Functional too!
April 8, 2016
Great accessory for my Laredo X, One of the first things I added when I bought this 5 truck years ago, I still smile when I look down and see them. Once installed you forget about the difficulty in installing the brake pedal. At least you know it wont slip off and become a hazard.Thumbs up.
ProsGreat traction, Very stylish, and the nubs make it easy to clean if you bring some mud into the truck.
ConsYes installing the brake pedal is a little difficult but not impossible. I just wished there was a matching pedal cover for the parking brake.
Great product, but a btch to install.
January 31, 2016
Kit was very nice looking and very functional, but as others have said, it is pointless in trying to install yourself, take it to a dealer.
ProsGood looking, functional.
ConsNear impossible to install with the very minimal instructions included.
By Mike
Pedal kit
January 14, 2016
I read the reviews on these and even though we own a couple of vintage sports cars had never thought that I would want something like this. I read the reviews regarding the installation and noted the difficulty with the brake pedal. I did heat them up but used a heat lamp as that is what I had handy and it really made the installation easier. Living in the cold midwest it was 40 degrees in the garage, so just a few minutes of heating both pedals made a world of difference. Also, I found that placing a mirror behind the pedals so that you could see what was going on without having to lay on your back simplified the installation too. A small spring hook tool, that could be used to work on the brake pedal worked well too. I also put some silicone spray on the brake pedal to aid with slipping it on much like a tire shop does when installing tire on metal rims. You only want to put a small amount on the inside otherwise it will be difficult to handle. The install didn't take long at all.
ProsYou can see the pedals at night if looking at the floor, since the originals are black, these stand out nicely. I thought that they would get dirty quickly or show grime from the salt and snow and so far they still look like the day I installed them. The original pedals would get sand stuck in the grooves, these don't have grooves for that to happen.
By Justin
Beloit, WI
August 10, 2015
Both of these items look great!!! The gas pedal went on with ease. The brake pedal took over an hour and was the battle of a life time. You will need a screw driver and need to soak the item in boiling (i mean boiling on the stove) hot water. Once you let it soak for a while, carefully take it and try and stretch it on. The screw driver will be the wedge to help work it on. The key is to get all 4 corners on, then wedge the rest of it on. Good luck!
By Nate
Johnstown, PA
May 14, 2015
The end result is worth "THE PAIN OF THE BRAKE". Just remember DON'T GIVE UP.
ProsQuality, adds a sweet look to the cockpit.
ConsPutting on the brake.
By Jim
Virginia Beach
Great look
May 2, 2015
As documented, break pedal very hard to stretch. Key is to soak for 10 min in boiling water. After installed they look great! And quality feel.
ProsQuality look
ConsHard to install break pedal.
By Luis R.
Stafford VA
Great looking addition
April 2, 2015
They complete my Grand Cherokee's interior look. Good Quality and straight forward installation. Just like it's mentioned in other reviews, the brake side is harder to install. I recommend reading the reviews here and learning from them. I used hot water to soften the rubber for about 5 mins, then stretching the cover's back side while it's warm. I also applied a thin film of grease to the pedal. Then flipped the top rubber side of the pad inside-out and pressed it against the bottom of the pedal. While keeping pressure, I slid the pad upwards ensuring the sides were engaging. Once it reached the top the pedal just snapped into place and it only needed some persuasion on the corners. The grease helped a great deal.
ProsLooks and quality
ConsBrake side is somewhat difficult to instal, but once in, you know it's not going anywhere.
By Amanda
Houston, TX
Brake pedal walkthrough
February 22, 2015
Ok the dreaded brake pedal, first boil some water, add the boiling water to a dish with the brake pedal and some dish soap in it. Leave it for 3-5 minutes, you want enough water that the pedal is submerged, I did mine metal side down. You need to cut 2 vertical slits at the end of the horizontal slit they provided, this makes the top part function as a flap and is a tad easier to go over the top with. I read so many review that said do the bottom first, I couldn't get it to work that way. So with a big face mirror on the floorboard so I could see what I was doing, and a flashlight pointed at it, I attached the top first, because the rubber has been softened by the boiling water it made it easier to pull the sides out, I attached the bottom left corner first. Then starting back at the top right corner I worked my way down and attached that side and bottom right corner, then all that was left was the horizontal section between the 2 bottom corners. Using a fat but small flathead screwdriver I worked the flap until it popped out and was on snug. The rubber on the bottom looks a little stretched from the backside but there's no way that thing is going anywhere.

Get exclusive offers and notices of new products sent directly to your inbox.

Become A VIP Member And
Get Our Newsletter

  • New Products
  • Coupon Offers
  • Special Deals
Thank you for joining our newsletter!