Infotainment 8.4-Inch 4C NAV UAQ Radio with Apple CarPlay and Android Auto for 2014-2021 Jeep Cherokee KL

Important Fitment Notes

• PLEASE PROVIDE YOUR VIN ON THE CHECKOUT PAGE. THE RADIOS ARE PROGRAMMED TO YOUR VIN AND ARE NON-RETURNABLE ONCE SHIPPED
• Vehicle's lower center stack must have a volume control dial. See picture below.
• Those of you who have the smaller 5.0-inch RA2 radio will need a replacement dash bezel. The Jeep factory released the Cherokee with 3 different colored bezels.
• Vehicle Programming Required - If you're upgrading from a 5.0-inch RA2 or 8.4-inch RA3 radio you will need to have your local Jeep dealer add the RSM - SiriusXM Travel Link code to your vehicle's build / VIN to be able to utilize the Travel Link feature (if desired). However, they must use their diagnostic scan tool to align the PROXI configuration data into the new ECU "Radio." They will follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under Body Control Module (BCM) Miscellaneous Functions menu.
• Vehicle Programming Required - If you're upgrading from an 8.4-inch RA4 GPS Navigation radio you will only need to have your local Jeep dealer use their diagnostic scan tool to align the PROXI configuration data into the new ECU "Radio" as the RSM code will already be coded to your vehicle's build / VIN.
• Those who upgrade to the UAQ system will not currently be able to subscribe to the Sirius Guardian feature. This is only available for vehicles factory equipped with the UAQ.